• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain and are durable and long-lasting. As opposed to aluminium and timber they don't get rusty or decay.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home and may even be fatal. You should take the time to ensure that your windows are in good shape.

For single pane windows it is fairly easy to replace windows, and the new one will usually fit inside the frame that was previously installed easily. However If windows with double panes are anchored by internal beading, it'll be more difficult to take out the old panes and put in new ones. In this instance, you will need to source some plastic spacers to aid the new pane in being able to fit correctly into the frame of the window.

Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass by yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes, so that any shards fall onto the fabric and not on the floor, where they could be trampled.

After the glass has been removed, it's a good idea to cover the gap with packaging tape or duct tape to prevent water and drafts from entering the property until a professional is able to come out and repair the window. It also acts as a barrier that will prevent any intruders to gain access to your home. If the gap is particularly large, you may want to consider using the security door with an integrated window, since it offers the best of both worlds.

2. Sagging

upvc window repair windows and doors are a low-cost, durable and energy-efficient alternative to timber windows with sash. However, with time, they can suffer from a variety of issues, including sagging. A sagging uPVC window can cause issues with light, draughts, and even security. It is crucial to act when you realize that your uPVC windows are falling down.

To fix a window that is sagging you can try repositioning the hinges. To do this, you'll have to open the window to access the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and test it for fitting. If you're happy with the fit, tighten the screws to ensure they remain in position.

If you aren't able to move the hinges you may require replacing the seal. Seals made of rubber can dry out and lose their elasticity over time, which causes them to lose their tightness. It is crucial to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles can also become loose. Most often this is due to screws that have become loose over time. However, it could also happen because the handle mechanism has been worn out. It's a good thing that it's simple to repair the handle of a window that is loose yourself. The first step is to close your window and do an experiment to ensure that it fits. The joints at the corners of the sash should align with the joint on the casing. If it isn't you can use a screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is crucial to act if you wake up every morning to discover mouldy walls and wet floors. Leaks of water from windows can cause structural damage to your home, and hinder your ability to control the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix that can be done by any competent DIYer. Depending on the severity of the issue is, the old caulking might need to be removed. It is essential to remember that when it is about uPVC window repairs, do not be tempted to 'over-caulk in order to make the area harder to clean and reduce the efficiency of your energy.

Check that any drainage holes have no debris in them and ensure that the sill pan is angled correctly to drain away from the window. In more serious cases you might need to consider replacing the window.

Mold spots and rotten sills are other signs of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the house.

It is also important to keep in mind that if the leakage originates from the glass in your double glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sliding. This can be easily fixed by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and open in a breeze, it may be hinges at fault. Anyone with the skills to fix them can replace hinges in just a few minutes.

Like all mechanical parts hinges will be damaged over time. It is very easy to replace a hinge on a window however it is simpler if you have someone to help hold the frame.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. Check for the arrows on each hinge to determine which way the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window in a certain way or due to poor installation at the factory. Sending us a photo through our website can often solve the issue. We are happy to give advice.

It is also important to grease the hinges regularly. Applying an engineering lubricant that is light to the hinges is an ideal method of doing this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also prevent corrosion and reduce the possibility of sticking. This should be done at least every year. WD40 or other solvent-based lubricants should not be used as they can damage your upvc window Repair windows.

5. Draughts

Draughts can be caused by several different things. The hinges may also become disaligned as a result of wear, causing a gap between the frame and sash. If they are beyond repair, it may be necessary to get them re-aligned. Secondly the interlock, this is located on the hinge side of the window, can be misaligned. Again, it may be possible to give them a good clean, but in some cases it might be necessary to have them replaced.

The next common cause of draughts is the window seals, these are susceptible to being worn out or damaged over time, and allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glass. This will help control indoor temperatures and decrease draughts.

Another method of reducing drafts effectively is to use a Draught-excluder. These are typically fabric tubes filled with a filler that can be hung over your window repair near me sill. They will help keep cold air out and keep your home warm and cozy!

With a little regular maintenance and repairs, your upvc window repair windows will provide an excellent level of insulation and security for your home. It is crucial to recognize that all windows have a lifespan and eventually, they will reach an point at which it is more cost-effective to replace them rather than fix them. So, if you are experiencing issues with your Upvc windows, it is always recommended to seek help from a professional as soon as you can.