• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Properly Start a Wood Burning Stove

Wood stoves can be an ideal option to conserve energy and heat a room. They require some care.

Many modern wood stoves meet EPA emissions guidelines. Look for an EPA sticker under or beside the grate to ensure your stove doesn't create lots of harmful pollutants.

How to Start a Wood Fire

The smell and the sound of a woodfire is an enjoyable addition to any home. It's important to know how to build a fire in your stove. Incorrect techniques can lead to an unburned fire that doesn't burn effectively and can cause creosote or smoke. These tips will aid you in starting the fire that will warm your home with minimal effort and ensure your safety.

Before you begin an fire, make sure you check the condition of your logs and coals. If they're too damp they could smother the flame and stop it from burning efficiently. It is also possible to open the flue to let any ash out that has been deposited into the stove.

Start by placing some small wood burners for sale, dry newspaper pieces in the stove. This will help to spark the tinder and ignite your kindling. When they begin to ignite, add a layer of larger pieces to the top of the pile. This should be done with a crosshatch design so that there is air between each piece.

If your wood stove is equipped with an automatic control for combustion, it will automatically pump air into the fire as it expands. This will allow the fire to burn steadily without the need to open the door of your stove often to keep it in check.

It is essential to avoid using too much tinder, since this can lead to the fire burning at a high rate and doesn't make use of the fuel as efficiently as it can. Once you've made a solid bed in your stove of sparks, tinder and kindling begin the main flame by laying down two large base logs on the grate. Then, on top of these base logs lay a layer parallel to them. This method of constructing a fire called a "top-down" fire can result in a successful and long-lasting fire that does not completely consume the larger base logs.

Close the damper when your fire is established and keep it shut. The fire may be smothered by opening the damper before it is fully established. It can also decrease the effectiveness of the fire.

Add Wood

Stoves can be used to efficiently heat your home and save you money. They can be used together with central heating systems or furnace to provide supplemental heat in large homes. Many of the new stoves that are clean-burning employ a superior combustion process that differentiates the burning process of volatile compounds from combustible gases and tar by supplying air in two different stages. The first stage allows for the vaporization of the volatile compounds and the second offers fresh air that is pre-heated. This improves the combustion process and helps reduce the odors.

The amount of heat you will get from a stove depends on the type and amount of moisture of the wood used, and also the size of the logs. The logs must be stored in a well-ventilated area for a period of time before you attempt to burn them to allow the wood to dry out. If the logs are not dry enough they will create plenty of steam that is basically wasted energy.

You should add wood to the pile at intervals and not all at once. The addition of too much wood at once could cause the temperature to rise within the firebox, creating an air vortex that pulls smoke and volatile compounds that are not burned back into the flames. This could reduce the effectiveness of your stove.

It is recommended to stay clear of any other combustibles, like cardboard or paper in your stove, as they are not wood and have very different physical properties that cannot be burned without creating dangerously high temperatures and exorbitant emissions. Also, you should not use compressed combustibles such as wood briquettes, as they have a very different chemical and physical composition to real firewood, and are not type-approved for use in wood burning stoves.

If you're installing wood-burning stoves in your home, it is essential to have it installed and tested by a qualified. A certified WETT technician will test your installation to ensure it is safe and functional. They can also make sure that your chimney works correctly. These professionals can also offer maintenance services to keep your chimney and Stove Wood burning in good condition. They can inspect the accessible areas of your chimney for leakage, and repair any problems found. They will also ensure that all occupants of the home understand and follow the evacuation procedure in the event of an accident.

Adjusting the Damper

A damper controls how much heat escapes to the chimney when you're not using your stove. It can also be used to manage the fire. If the flue is opened but the damper is not closed enough, the fire won't burn properly and it will release smoke into your living area. To get the most effective fire using the damper properly adjusted, you have to test different locations and observe how each affects the flames.

You want to keep your damper open to let air flow into and out of the flue when a fire is burning. This allows the fire to get a good fire going and helps it stay in good shape so that you can enjoy it for a long time. A proper opening will prevent the fire from starving of air and will keep it from blowing out smoke.

In order to properly adjust your damper, you have to first make sure the fireplace is preheated and the stove is hot. This will ensure that the chimney is warm and it also has an adequate draft. Once these are done the damper for wood stoves can be adjusted.

After the fire has smolder a bit you should shut the damper down to about three-quarters of its original position. This will stop the warm air in the room from getting into the chimney, while still allowing smoke to escape.

This is the most effective way to keep your fire lit and prevent it from getting too hot. The draft may be stopped if one closes the damper to far, but a cold wind could be able to enter your home when the damper is not closed.

You can determine how much the damper is opened by holding your hand near the top of the inside of the flue pipe. If you feel a small wall mounted wood burning stove breeze pushing against your hand, the damper is likely to be open.

The damper settings may differ between stoves and even among different types of wood. You can experiment with different settings to get an idea of the best wood burning backpacking stove setting for your stove.

Clean up

After an incident, it is essential to clean the stove and flue. This will reduce the risk of a chimney fire which is the primary reason for wood stove-related fires in homes. Creosote, a sticky substance that forms on the inside of the stovepipe and can be very dangerous. Moisture and unburned particles of wood that cannot escape the flame are the reason for this chemical. It can also happen when fires are not lit properly.

Regular cleaning helps keep away the buildup of creosote. The most effective method for doing this is by sweeping the chimney every year. It is recommended to have your fireplace and stove professionally inspected and cleaned at least once a year.

It is also recommended to clean the Ash tray and grate frequently. It is a good idea to only use seasoned wood to burn, since this will result in less creosote and ash. Avoid burning cardboard, paper and plastic. These items could release dangerous chemicals to the air and flue that could end up in your home.

The glass on the wood burning stove needs to be cleaned frequently as well. Most newer wood stoves have self-cleaning windows so they do not require as much scrubs. You can apply stove glass cleaners to the glass if you aren't getting the glass as clean as you would like on your wood stove.

Some other helpful tips for maintaining your wood stove include turning the vent down when you are not using it and slamming a window or door to increase air flow. This will keep the fire burning hotter and more efficiently, as it will not need to work as hard to circulate the air. It is also a good idea to not stack logs or leave them in the fire for long periods of time as this can lead to splitting and warping. It is also a good idea to not use compressed combustible logs in your wood stove, as the paraffin they contain could melt and spill down into the flue, which could cause damage to the stove.