• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they don't rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will reduce repair costs as well as increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and even be fatal. You should take the time to ensure that your windows are in good condition.

For single pane windows it can be relatively simple to replace them, and the new window is usually able to fit into the frame that was previously installed easily. If windows with double panes are held together by internal beading, it will be harder to remove and replace the panes that were previously in use. In this instance, you will need to locate some plastic spacers to assist the new pane to fit correctly into the frame of the window.

If you're planning to try to remove the window panes by yourself, it is essential to wear the appropriate safety equipment that includes gloves with a thick layer of material and eye protection. It is also a good idea to lay down a drop cloth before you start working on the glass so that any fragments of glass fall on the fabric instead of onto the floor where they could be trodden under and cause further damage.

Once the glass is removed and the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to prevent drafts and water from entering the home until a professional is able to come out and fix the window. It also acts as a barrier that will prevent any intruders from getting access to your home. If the gap between the door and the window is substantial, you may prefer an alarm system that has a window. This will provide the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash windows. However, over time, they are susceptible to a range of issues like sagging. A sagging window in uPVC can cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to prevent the problem from worsening.

Repositioning the hinges could aid in fixing a window that is sagging. First, you'll need to open the windows so you can access the frame. Then, using an screwdriver, take off the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after having relocated your hinges. If you're happy with the fit, tighten the screws to ensure that they stay in the right place.

If you can't reposition the hinges, you might require replacing the seal. Seals made of rubber can dry out and lose their elasticity over time, which causes them to loosen. If this happens, it's crucial to replace the seal as quickly as you can to ensure that your uPVC windows are watertight and draught-proof.

uPVC handles may also become loose. Most often it is due to screws that have come loose over time. However, it can also happen because the handle mechanism has been worn out. Luckily, it's not difficult to repair a loose uPVC window handle yourself. First, you'll need to shut the window and perform a test fitting. The corners of the sash should be aligned with the casing joint. If it isn't you can use a screwdriver to loosen up the handle. Then turn the mechanism into position.

3. Water Leaks

It is important to take action if you awake each day to discover mouldy walls and floors that are wet. Windows that leak water do not only lead to the degrading of the structure of your home but also hinder your efforts to regulate the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be completed by any DIYer who has the ability. Based on the severity of the issue the caulking that was used up may require removal before a fresh layer can be put on. It is essential to keep in mind that when it is about uPVC window repairs, do avoid the temptation to "over-caulk and then make the area more difficult to clean and could reduce the efficiency of your energy.

Verify that the drainage holes have no debris in them, and also ensure that the sill pan is angled correctly to drain away from the window. In more serious instances, you may need to think about replacing the window.

Moldy sills and rotten ones are another sign of water leakage. The mold thrives in damp environments and can quickly spread across the house.

It is also important to remember that if the leak is coming from between the glass of your double glazed window repairs near me-glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sagging. Again this can easily be repaired by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and blow open in a breeze it could be hinges that are at fault. They can be replaced by any competent DIYer and can be completed in a matter of minutes.

Like all mechanical parts hinges are prone to be damaged over time. It is very easy to replace a hinge on a window, but it's simpler if you have someone to help you hold the frame.

Check that the upvc window repair hinges are closed and open in the correct direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The issue could be caused by opening the window improperly or a faulty installation at the factory. Sending us a photo via our website will often resolve the problem. We are more than happy to give suggestions.

It is also crucial to lubricate the hinges on a regular basis. Applying a light engineering lubricant to the hinges is an ideal method of doing this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also helps prevent corrosion and decrease the chance of sticking. Ideally, you should do this once a year. WD40 and other solvent-based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by different factors. The hinges can also be disaligned as a result of wear, causing a gap where the sash meets frame. They can be repaired by giving them a thorough clean, however if they are beyond repair it may be necessary to have them realigned or replaced. The interlock may be unbalanced. This happens on the hinge side and may need to be cleaned. In some cases it might be necessary to replace these.

These seals can wear down or become damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity lenses. This will help regulate indoor temperatures and lessen the risk of draughts.

Lastly, one of the most effective methods to reduce the draughts in your home is to use an draught excluder. These are typically made of fabric which are filled with a sort of filler and can be put on the windowsill on top. They can help stop cold air from entering and keep your home warm and cosy!

Your upvc windows can keep providing excellent insulation and security for your home with a little regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually become worn out, and it could be cheaper to replace them instead of fixing them. So, if you're having issues with your upvc windows, it is recommended to seek help from a professional immediately.